Products
CPR-Zero
- Space-saving M/C pursuing functionality and cost
- Wire size – AWG#32~#14
Description:
Auto Crimping Machine - Dual-End Crimp/ Dual-End Seal Insertion and Crimp.
Product Features / Specifications:
Features
- Long-term UV and Ozone resistance
- High volume output – 0.85 sec/piece (4,500 pcs/hr)
- Adaptable for wide range of wires size
- Reductions in space and burden for operator because of pre-feeder on the side of machine
- Single-end soldering unit or insertion unit can be installed by quick change (Option)
- Crimp camera to inspect crimp form available (Option)
Specifications
| Model | CPR-ZERO | |
|---|---|---|
| Functions | Wire measuring and cutting, Dual-end strip, Strip depth, Pull-back strip depth, Dual-end half strip, Dual-end crimp (Sinking mechanism), Crimp position adjustment, Jogging | |
| Capacity | Crimp to crimp: 0.85 sec/pc (Length: 35 mm 4,200 pcs/hr.) Twist and solder to crimp: 1.9 sec/pc (Length: 50 mm 1,890 pcs/hr.) |
|
| Wire size |
0.3 – 2.0 mm2 (AWG#22 - #14 UL 10368 equivalent) Wire outer diameter Ø1.4 mm – Ø3.4 mm |
FX ASY: 0.03 – 0.5 mm2 (AWG#32 - #20 UL 10368 equivalent) Wire outer diameter Ø2.3 mm or less |
|
Wire cutting length |
35 – 20,000 mm (0.1 mm increment) *Min. length changes according to processing conditions |
|
|
Wire cutting accuracy |
Below 100 mm: 0.5 mm+ (Wire cutting length x 0.002), 100 mm and above: 1.0 mm+ (Wire cutting length x 0.002) |
|
|
Strip length |
Side 1: 1.0 – 10.0 mm, Side 2: 1.0 – 17.0 mm |
|
|
Strip depth |
Max. adjustment 3 mm (300 steps: 0.01 mm/step) with pull back function |
|
|
Crimp capacity |
21.500N (2.2TON Equivalent) Servo Press x 2 |
|
|
Detectors |
Wire run-out, Wire overload, Laser type detector for strip error, Terminal run-out, Terminal overload, Crimp error, Low air pressure |
|
|
Power source |
3 phase AC200V±20V, 50/60Hz, 16A |
|
|
Compressed air |
0.5Mpa (5kgf/cm2) approx. 100NL/min (Use clean dry air) |
|
|
Dimension |
920W x 800D x 1,450H , approx. 560kg |
|
|
Options |
Wire reel stand, Conversion KIT for other manufacturer’s APL, Non carrier-strip cut pipe, Signal tower, Wire joint detector, FX ASY, Terminal paper winding device, Crimping force monitor, Soldering unit, Seal insertion unit, Low position terminal reel stand, Crimp camera |
|
Document:
CPR-Zero